X-ray diffraction and Raman spectra of merrillite at high pressures

ABSTRACT

The compressibility and effect of pressure on the vibrations of merrillite, Ca₉NaMg(PO₄)₇, were studied by using diamond anvil cell at room temperature combined with in-situ synchrotron X-ray diffraction and Raman spectroscopy up to about 18 and 15?GPa, respectively. The pressure-volume data was fitted by a third-order Birch–Murnaghan equation of state to determine the isothermal bulk modulus as K₀ ?=?87.2(32) GPa with pressure derivative K₀′?=?3.2(4). If K₀′?=?4, the isothermal bulk modulus was obtained as 81.6(10) GPa. The axial compressibility was estimated and an axial elastic anisotropy exists since a-axis is less compressible than the c-axis. The Raman frequencies of all observed modes for merrillite continuously increase with pressure, and the pressure dependences of stretching modes (v ₃ and v ₁) are larger than those of the bending modes (v ₄ and v ₂) and external modes. The isothermal mode Grüneisen parameters and intrinsic anharmonicity of merrillite were also calculated.     

Direct synthesis of Poly(Ԑ-Caprolactone)-block-poly (glycidyl methacrylate) copolymer and its usage as a potential nano micelles carrier for hydrophobic drugs

Ring-opening (ROP) and enzymatic copolymerization (ECP) are among the most widely used approaches for synthesizing copolymers of polycaprolactone (PCL). It involves multiple-step reactions and the utilization of enzymes that make the process a lot more complicated, time consuming, and expensive. Atom transfer radical polymerization (ATRP) has been adopted to synthesize a novel amphiphilic copolymer in our study. The study presents a method to eliminate the ROP/ECP multiple steps in monomer polymerization thus making the process simpler and smoother. The synthesis of cationic polymer micelles copolymer of PCL-PGMA (polycaprolactone grafted poly glycidyl methacrylate) was carried out using direct functionalization of hydroxy group in crude PCL to achieve a higher degree of functionalization, i.e., 12.8% for macroinitiator. FTIR and ¹H-NMR confirmed the successful synthesis of the copolymer with better control over the molecular weight with a PDI (1.84). DSC and XRD results showed the reduction of crystallinity by 86.81%, making copolymer more compatible for drug delivery application. The synthesized copolymer was further converted to nano-micelles drug carrier having an average size of 96.08 ± 21.22 nm. The drug encapsulation efficiency achieved was 60.0 ± 1.7%, and nano-micelles rendered a slow and controlled release of naproxen with long-term storage stability.     

Water stability of cobalt doped ZIF-8: a quantitative study using optical analyses

Zeolitic imidazolate frameworks (ZIFs), in particular ZIF-8 (made of Zn²⁺ and 2-methyilimidazolate) and cobalt-doped-ZIF-8, are found important for many energy and environmental applications. It was reported that ZIFs show excellent structural stability in water and thus ideal for aqueous applications. However, recent studies also found some evidence that ZIF-8 undergoes hydrolysis in water. Despite the importance of ZIF's stability in many aqueous applications, the extent of ZIFs' degradation in water is still not yet fully understood. In this study, we report a quantitative study of the water stability of 0–100 at% cobalt-doped ZIF-8, using a new combination of analytical tools. The study demonstrated the importance of analyzing both filtered powders and the filtrate liquid systematically, in particular by using UV–Vis spectroscopy and thermogravimetric analysis. The combination of analytical tools allowed the study on the effects of ZIF concentrations in water, cobalt doping levels, and amounts of ligands in water on the water stability of ZIF samples. The effect of cobalt-doping was investigated by using ZIF particles with identical sizes (200–400 nm), in order to eliminate the effects of particle size on hydrolysis. Unlike other synthesis methods, a mechanochemical ball milling method allowed the production of nano-scale ZIF-8 particles with similar sizes, independent of cobalt-doping levels. The proposed combination of analytical tools including UV–Vis spectroscopy can be applied to the study of the water stability of other MOF materials.     

SU-8光栅结构中的液晶激光特性

设计制作了SU-8光栅结构的染料掺杂手性向列相液晶激光器件,在器件正面和侧面均实现了随机激光辐射。将激光染料PM597、手性剂S-811、向列性液晶TEB30A按一定比例均匀混合,注入反平行摩擦处理的液晶盒中,器件的下基板通过光掩模法刻蚀出周期为15μm的光栅。利用532 nm的Nd∶YAG固体脉冲激光器作为泵浦源,器件的侧面既在580~590 nm范围内出现了多个离散分立的随机激光辐射峰,FWHM约0.19 nm,又在579~585 nm范围内出现独立的两个激光辐射峰,FWHM约0.19 nm;在器件正面获得了584~590 nm范围的随机激光辐射谱,FWHM约0.17 nm。加热器件至61℃,液晶相变为各向同性态,器件侧面仍出现了波长约590.60 nm、FWHM约0.24 nm的激光辐射峰。分析得出,液晶盒中引入SU-8光栅结构后,光子同时在液晶分子间多重散射和SU-8光栅中布拉格反射获得反馈放大,两种机制相辅相成。器件侧面出现的独立激光辐射峰主要由SU-8光栅布拉格反射提供反馈放大形成,而器件侧面和正面的随机激光辐射峰主要由液晶分子间多重散射提供反馈放大形成。     

Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

A General Catalyst Based on Cobalt Core–Shell Nanoparticles for the Hydrogenation of N-Heteroarenes Including Pyridines

Herein, we report the synthesis of specific silica-supported Co/Co₃O₄ core–shell based nanoparticles prepared by template synthesis of cobalt-pyromellitic acid on silica and subsequent pyrolysis. The optimal catalyst material allows for general and selective hydrogenation of pyridines, quinolines, and other heteroarenes including acridine, phenanthroline, naphthyridine, quinoxaline, imidazo[1,2-a]pyridine, and indole under comparably mild reaction conditions. In addition, recycling of these Co nanoparticles and their ability for dehydrogenation catalysis are showcased.     

Trisaminomethane–cobalt complex supported on Fe3O4 magnetic nanoparticles as an efficient recoverable nanocatalyst for oxidation of sulfides and C–S coupling reactions

In this work, trisaminomethane–cobalt complex immobilized onto the surface of Fe₃O₄ magnetic nanoparticles was successfully prepared via a simple and inexpensive procedure. The prepared nanocatalyst was considered a robust and clean nanoreactor catalyst for the oxidation and synthesis of sulfides under green conditions. This ecofriendly heterogeneous catalyst was characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, energy-dispersive X-ray spectroscopy, inductively coupled plasma-atomic emission spectroscopy, thermogravimetric analysis, vibrating sample magnetometry, X-ray mapping, scanning electron microscopy, and transmission electron microscopy techniques. Use of green medium, easy separation and workup, excellent reusability of the nanocatalyst, and short reaction time are some outstanding advantages of this method.     

Emission behavior of naphthalimide-coumarin cassette

ABSTRACT

In this contribution, a dye (C₈-alkyl substituted Naphthalimide-Coumarin, CNC) with naphthalimide and coumarin incorporated together with -NHN = bridge unit. The compound was fully characterized by NMR and HRMS spectroscopic techniques. Highly emissive character was investigated in detail in various polar environments. The emission maximum varied from 430 to 470 nm. In polycarbonate film, CNC is also highly emissive with 560 nm emission peak. While in sold, the emission maximum was further shifted to 580 nm due to the more tightly packing mode than that in film. The C₈-alkyl substitution enhances the solubility of CNC and also contributes most to its solid emission.     

Statistical analysis of S/N-curves by means of a fatigue database for polypropylene

Material databases of plastics are becoming more and more the focus of applied science and commercial use in industry. Material properties of material manufacturers are often provided in publicly accessible material databases, which usually contain processing and mechanical properties under static loadings. Fatigue strength values are usually not accessible. The fatigue data for thermoplastics is of particular interest, as these materials have a particularly high lightweight construction potential and can be processed with a high degree of automation and reproducibility.Individual fatigue strength parameters for a specific material, environmental condition, geometry and loadings have been investigated in numerous publications. However, no work has been found in which fundamental interactions of different materials, environmental conditions, geometries and loadings on the course of the S/N-Curve have been investigated.In this paper, different effect relationships between temperature, filler type and filler content, fiber orientation and load ratio will be presented for the material Polypropylene (PP). A fatigue strength database of 11 different material manufacturers, from 71 different S/N-Curves with 606 tested samples, serves as a basis. The fatigue database enables a digital twin, which is used for the design of structural components to add a third dimension with artificial intelligence, and which is trained by an engineer. From the determined effect relationships, fatigue factors are to be derived and can be used to evaluate the fatigue strength of a component in the design process and to train the digital twin. The fatigue-strength values from the database also allow a statistical consideration of the slope k and the scattering of the S/N-Curve. The different S/N-Curves are transferred into a Haigh diagram, from which the functional course of the mean stress is determined.